FEP & PFA Film

Thicknesses from 0.01mm to 2.4mm (0.001" to 0.090")

Excellent thermal stability: Usable throughout a wide thermal range -200 to +200°C (-328 to +392°F)
Chemical Inertness: Resists almost all chemicals, such as strong acid, strong alkali, salt, and organic solvent.
Anti-stick property: The lowest surface energy of all plastic films; displays excellent mould release and anti-stick properties.
Electrical reliability: High electrical insulation, characterised by low-dialectic constant and dissipation factor, and by high dialectic strength over a wide range of temperature and frequency.
Resistance to weathering: Inert to outdoor exposure; with unchanged mechanical and physical properties after 10 years.
Non-flammability: Will not burn in air or gas having an oxygen concentration of less than 95%.
High transparency: Transparent, with excellent transmission of ultraviolet rays and visible rays; lowest refractive index of all plastic films; characterised by very low light reflection.

Also available:

Surface treatment for bonding applications.(sizes from 0.025mm to 0.1mm treated by corona discharge, larger sizes chemically etched)
Pigmented films available for specialist applications (e.g. release film) red, white, black, chromed.
Perforated films available for release film applications.
Standard widths are 1150mm or 1250mm depending on thickness, larger sheets can be supplied by use of Holscot's welding techniques which provide a virtually indiscernible joint.
Other thickness' available upon request.

Additives

Holscot has recently carried out extensive work using pigments with its tubing and film including:

Yellow

A yellow pigment was added to base film used for protection sleeves to blend into it's surrounding.

Red

This has been used in sheet and tube to alert customers of the presence of the film.

Black Conductive Additives

Extensive work has been done on the incorporation of conductive black additives into production of sleeving and film. This has the two fold benefit of adding conductivity for specific uses in the Reprographic and Biological areas and providing an Anti-Static surface.

Holscot Production FEP and PFA Film

Holscot is now producing FEP and PFA film in thick gauges from 0.25mm in widths up to 1180mm! This means that we now have individual flexibility in producing the product that you require at the right price.