|
Fitting a Holscot Teflon* Sleeve to a Roller Fitting the Sleeve to the Roller A lifting pole is required to support the roller while the sleeve is slipped over the roller.
Shrinking down the Sleeve & Stretching
Working from one end to the other, shrink the sleeve using a high powered hot air gun. The sleeve will grow in length during shrinkage. For larger diameter sleeves we recommend the use of a stretcher to provide tension as the sleeve shrinks, to prevent wrinkles.
The Sleeve can either be trimmed flush or shrunk over the ends of the roller. Return to top of the page to Measuring Sleeve to Table of Roller Sizes More detailed fitting instructions are available as a PDf file To download the file click here or to see a video of how to fit a sleeve please see http://www.youtube.com/watch?v=nAntIUmnAeoOr see how a bowed roller is sleeved http://www.youtube.com/watch?v=ggN2eU_73ow
|