Holscot's range of Teflon® heat shrinkable sleeves provide the ultimate non stick surface for rollers of any diameter. Manufactured in the UK, the sleeves offer the most cost effective and simple way to improve the quality of your end product.
- Cost Savings
The elimination of build up from sticky substances such as adhesives, latex and size means less downtime and less scrap material because of the improvement in end product quality. End users have reported efficiency increases of over 25%.
Long Life
The use of TeflonŽ sleeves protects the roller surface. The thickness of the sleeve is usually 0.5mm which provides a substantial covering.
- Chemical Resistance
Holscot TeflonŽ roller covers offer total protection against corrosive chemicals and cleaning solvents.
- Any Substrate
The sleeves can be fitted to rollers of virtually any construction
- Choice of materials
The majority of sleeves are supplied in TeflonŽ FEP. However, for higher flexibility and high temperature applications, TeflonŽ PFA sleeves can be supplied in the same range. For high temperature and/or pressure applications we recommend that the sleeves be bonded to the rollers. Holscot will supply the sleeve with a chemically etched inside diameter to allow the sleeve to be bonded.
Below is a table of the sizes of rollers that can be covered.
Holscot Range of Seamless
Heat Shrinkable Sleeves in FEP or PFA
25mm - 380mm Diameter
| Nominal
Diameter mm |
Nominal
Diameter Inches |
Will
Fit Diameters mm |
Will
Fit Diameters Inches |
Min
Expanded Diameter mm |
Min
Expanded Diameter Inches |
| 25 | 1" | 25-30 | 1"-1.2" | 33 | 1.3" |
| 32 | 1.25" | 30-36 | 1.2"-1.4" | 41 | 1.6" |
| 38 | 1.5" | 36-43 | 1.4"-1.7" | 48 | 1.9" |
| 51 | 2" | 43-53 | 1.7"-2.1" | 58 | 2.3" |
| 64 | 2.5" | 53-66 | 2.1"-2.6" | 71 | 2.8" |
| 76 | 3" | 66-79 | 2.6"-3.1" | 83 | 3.3" |
| 89 | 3.5" | 79-89 | 3.1"-3.6" | 96 | 3.8" |
| 102 | 4" | 89-109 | 3.6"-4.3 | 114 | 4.5" |
| 127 | 5" | 109-132 | 4.3"-5.2" | 137 | 5.4" |
| 152 | 6" | 132-157 | 5.2"-6.2" | 162 | 6.4" |
| 178 | 7" | 157-178 | 6.2"-7.0" | 183 | 7.2" |
| 203 | 8" | 178-211 | 7.0"-8.3" | 216 | 8.5" |
| 229 | 9" | 211-234 | 8.3"-9.2" | 241 | 9.5" |
| 257 | 10.5" | 234-269 | 9.2"-10.6" | 279 | 11" |
| 305 | 12" | 269-307 | 10.6"-12.1" | 325 | 12.8" |
| 380 | 15" | 307-401 | 12.1"-15.8" | 411 | 16.2" |
Standard Lengths - Sleeves must be ordered in Standard lengths
25mm - 127mm diameter available in lengths
0.9m, 1.2m, 1.5m, 1.8m, 2.1m, 2.4m, 3.0m, 3.7m, 4.3m, 4.9m, 4.9m, 5.5m, 6.1m.
(3', 4', 5', 6', 7', 8', 10', 12', 14', 16', 18', 20')
152mm and upwards available in lengths
6.7m, 7.3m, 7.9m, 8.5m, 9.1m
(22', 24', 26', 28', 30')
Top of Page Measuring & fitting Heat Shrinkable Sleeves Drying Cylinders
